Samsung OfficeServ 7030 Telephone System
Samsung has released it’s latest venture into the small business telephone system market with the OfficeServ 7030. This system has been released to address the small businesses where a 7100 is a bit too large. In spite of it’s small size the OS7030 supports all of the advanced features found in the 7100, 7200 and 7400 such as CTI, VoIP trunking, VoIP networking and IP keysets.
The OS7030 cabinet provides the processing, memory and switching. It comes with two built-in single line ports, two slots for station cards and one dedicated slot for the trunk card. The basic system comes without any trunk cards or station cards to help keep costs down for those that want to use SIP trunks or IP keysets.
The 7030 has an embedded auto-attendant and voice mail. Only the Auto-Attendant is active by default though, the voice mail must be licensed in order to function. When activated the voice mail will provide 2 ports, over 14 hours of storage time, up to 256 voice mailboxes and will deliver messages to email as a .wav attachment (5 seats are included but you will need another license to unlock more than 5 email seats).
The OS7030 also has 4 MGI (Media Gateway Interface) channels for VoIP features. These channels must also be activated through purchasing a one to four port license. These MGI channels are used for IP Phones, IP networking and SIP trunks.
Adding additional station and line capabilities are achieved by adding interface modules to the main cabinet. There are 2 station module spots and one spot dedicated for a trunk card. Available interface modules are as follows:
2DM (2 port digital station module): Provides 2 digital station ports for Samsung digital phones.
4DM (4 port digital station module): Provides 4 digital station ports for Samsung digital phones.
4SM (4 Port single line module): Provides 4 analog station ports.
4TM (4 port trunk line module): Provides 4 loop start ports with disconnect detection and caller ID.
4LM (4 port LAN module): Provides 4 10/100 base t ports.
Programming the OfficeServ 7030 is accomplished through keyset programming or through a web browser.
