The first step is to record your temporary message in an instruction mailbox.  In this case we are using instruction mailbox 803 (003).  Before you record a new message in mailbox 803 make sure that it is not being used by choosing the “listen option” before re-recording.  This is assuming you have a TelephoneSystemsDirect.com NEC [...]

STEP 1: PRESS ICM, DIAL 700.
“please enter the mailbox number”
STEP 2: DIAL 300
“you have no new messages”
STEP 3: DIAL 72
“welcome to the system administrator menu”
STEP 4: PRESS THE BUTTON UNDER INST (OR NEXT TO INSTRUCTION ON A 34-BUTTON SUPER DISPLAY PHONE)
“please enter the mailbox number for the [...]

NEC DSX Intramail PRO Voice Mail
One of the reasons why the NEC DSX-40, NEC DSX-80 and NEC DSX-160 telephone systems have become so popular in today’s business marketplace might be because of their NEC DSX Intramail PRO Voice Mail. NEC DSX Intramail voice mail has emerged as a viable option because it features programming simplicity, powerful [...]

The NEC DSX Telephone System was designed for mid-sized businesses whose size might increase in the next few years. Principally, the NEC DSX Telephone System was created on the success of its predecessor, the NEC DS2000. Whereas the DS2000 can accommodate a maximum of thirty-two Lines, the NEC DSX Telephone System increases that amount to [...]

Line appearance keys
The first row of button usually has your line keys labeled line 1 - line x
A line key provides an extension user with one-button access to outside lines. The extension user just presses a line key to place or answer a call on the line. There is no need to dial codes to [...]

Transfer permits an extension user to send (i.e., extend) an active call to any other extension in the system. With Transfer, any extension user can quickly send a call to the desired co-worker. A call a user transfers automatically recalls if not picked up at the destination extension.
An extension user can Transfer both outside calls [...]

The personal speed dial buttons on the NEC DSX 22B Display Tel and the DSX 34B Display Tel are the ten buttons located directly below the display. The first of these buttons corresponds to speed dial bin 701 and the last speed dial 710. Once a speed dial number has been stored in [...]

The NEC DSX-40, DSX 80 and DSX 160 phone system can do a conference call with up to 8 members. This can be a combination of outside lines (up to the number of telephone lines you have from the phone company) and internal extensions. With the NEC phone system you can have a maximum of [...]

Incoming calls on a NEC DSX telephone system usually follow Key Ringing (3112).  The DSX 22B and 34B Display Phones can be programmed to ring or not ring on an individual basis by using the feature code # 7 2 5.   Press # 7 2 5 and you’ll notice that all of your line appearance buttons [...]

To make programming changes on the NEC DSX-80, DSX-40 or DSX-160 telephone system with PC Programmer you will first need to download and install the software (click here).  After installing the program on your PC you will need to connect the NEC telephone system to your Local Area Network and assign an IP address to [...]